Welcome to EASTSIGNS
Follow Us:
Laser Machine
Laser Engraving Machine
Reliable Manufacturers of cnc Facilities
Reliable Manufacturers of cnc Facilities

The Precautions of Laster Engraver and Cutter

April 1st, 2016

Laser engraver and cutter with laser beam,can engrave and cut a variety of material.


laser marking machine


1. Laser engraver and machine should be used whenever possible in a clean, 10 ℃ -35 ℃ environment, keep the optics dry and dust-free. Usually we need to ensure that a separate enclosed workplace, to ensure that the indoor temperature, the ground have to paint or tiles, installation of air conditioning.

2. The provision of equipment our main power lines must be installed on an air switch, in order to make the protection, prohibited the use of triangular plug.

3. The customer shall be provided with a main power ground, non-virtual connection!

4. The circulating cooling water tank is preferable to use deionized water, the absence of deionized water, distilled water can be used in place; circulating cooling water use for some time should be promptly replaced (at least two weeks is recommended change the water), so as not to affect the efficiency of the laser .


Contact Us

Fax: +86 10 5723 0775

Tel: +86 10 5723 0775

 E-mail: info@eastcnclaser.com

+86 105 7230 775

info@eastcnclaser.com

Contacts
Products
E-mail
Skype